2-1/2" Galvanized Steel Tension Band 20 Pack
The American Fence Company
This 2-1/2” Tension Band connects to a tension bar to tighten the chain link fabric of your fence.
- Galvanized; rust resistant
- Nuts and bolts not included
- For 2-1/2” diameter posts
- Can be used for gate frames
- Comes in black, item #10406B
How the part fits? 2-1/2” tension band is designed to fit around a 2-1/2” terminal post.
Where is it installed? 2-1/2” tension band is installed by sliding over the 2-1/2” terminal post once the post is set. Tension bands will be evenly placed on each terminal post.
How many do you need? You will need 2-1/2” tension bands for every stretch of fence. The amount of tension bands you will need per terminal post is 1 less than the height of the fence. For example, if you have a 4’ fence you will need (3) 2-1/2” Tension Bands per terminal post. There are two exceptions, if you have a 3’ or 3-1/2’ fence, you will need (3) 2-1/2” tension bands. For a full stretch of fence from terminal post to terminal post, you will need double the amount. Ex: For a stretch 4’ fence you will need (6) total 2-1/2” tension bands.
2-1/2" post size, .28lbs
A 2-1/2” tension band is installed by sliding it over the 2-1/2” terminal post once the post is set. You will need to space the 2-1/2” tension bands evenly on the terminal post. Then you will slide the 5/16” x 1-1/4” bolt through the tangs and tighten the nut.